Changing Behavior Modes

Perform the following steps to change the behavior mode and parameters:

  1. In the Change Personality page, select the Change Auto-configure behavior radio button.
  2. From the Select Behavior Mode drop-down list, select an appropriate behavior mode.
    The available behavior modes are based on the current firmware support.
    • Unconfigured Good/NONE – If a user selects this option, then all the configured drives are converted to Unconfigured Good Drive.
    • JBOD – If all the physical drives are in unconfigured good state, once you select the JBOD mode, all the physical drives are automatically converted to JBOD physical drives.
    Figure 1. hange Personality Dialog
  3. Select the appropriate behavior mode and click Change.